5
Amirchamza Khabibulloev
Kostroma State University
Alexandr P. Grechukhin
Kostroma State University
Pavel N. Rudovsky
Kostroma State University
Ivan V. Starinets
Kostroma State University
MODELLING AND MANUFACTURING OF TECHNOLOGICAL EQUIPMENT AND COMPLEX ELEMENTS OF A LOOM USING ADDITIVE TECHNOLOGIES
Khabibulloev A., Grechukhin A. P., Rudovsky P. N., Starinets I. V. Modeling and manufacturing of technological equipment and complex elements of a loom using additive technologies. Technologies & Quality. 2023. No 3(61). P. 29–33. (In Russ.) https://doi.org/10.34216/2587-6147-2023-3-61-29-33.
DOI: https://doi.org/10.34216/2587-6147-2023-3-61-29-33
УДК: 677.024.1
EDN: JGSONN
Publish date: 2023-09-08
Annotation: Equipment for three-dimensional orthogonal weaving has significant differences from looms used to obtain single-layer fabrics. At the same time, many structural elements are in the debugging stage, which requires frequent changes in their shape, which is associated with the refinement of the process parameters. The use of traditional technologies such as sheet stamping to obtain such parts is impractical due to the low serialisation of parts and complex shape. The way out, in this case, is the widespread use of additive technologies in this case. In this case, the parts are made of plastic. The most common materials are ABS; petg; PVA. Compared to steels, they have very low mechanical characteristics such as yield strength, elastic modulus, etc. Therefore, their use for the manufacture of tooling should be accompanied by appropriate design calculations that can be performed in one of the common CAD systems.
Keywords: technological equipment, 3D printing, weaving reed, 3D model, support material, ABS, Petg, PVA
Literature list: 1. Spahiu T., E. Canaj, E. Shehi. 3D printing for clothing production. Journal of Engineered Fibers and Fabrics. 2020:15:43–51. 2. Forman J., Dogan M. D., Forsythe H., Ishii H. Defe Xtiles: 3D Printing Quasi-Woven Fabric via Under- Extrusion. Proceedings of the 33rd Annual ACM Symposium on User Interface Software and Technology. 2020:1222–1233. URL: https://www.researchgate.net/publication/345036029_DefeXtiles_3D_Printing_Quasi-Woven_Fabric_via_Under-Extrusion (accessed 1.06.2023). 3. Hudson S. E. Printing teddy bears: a technique for 3D printing of soft interactive objects. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems (CHI ’14), 2014, pp. 459–468. 4. Peng H., Mankoff J., Hudson S. E., McCann J. Layered Fabric 3D Printer for Soft Interactive Objects. Proceedings of the 33rd Annual ACM Conference on Human Factors in Computing Systems, 2015, pp. 1789–1798. 5. Beecroft М. 3D printing of weft knitted textile based structures by selective laser sintering of nylon powder. IOP Conf. Ser. Mater. Sci. Eng. 137 (July 2016), 2017. URL: https://www.researchgate.net/ publication/305684541 (accessed 1.06.2023). 6. Grechukhin A. P., Ushakov S. N., Zaitsev D. V., Tikhomirov L. A. Method of forming 3D-orthogonal woven fibrous material. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educational Institutions. Series Textile Industry Technology]. 2016;6:118–122. (In Russ.) 7. Grechukhin A. P., Ushakov S. N., Rudovsky P. N., Palochkin S. V. Determination of rational parameters of the threading system during the formation of a three-dimensional orthogonal woven fibrous material. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educational Institutions. Series Textile Industry Technology]. 2018;5(377):111–115. (In Russ.) 8. Ushakov S. N., Grechukhin A. P., Rudovsky P. N., Palochkin S. V. Influence of the offset value of the horizontal weft layer on the density of vertical layers of threads in the formation of three-dimensional orthogonal fabrics. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educational Institutions. Series Textile Industry Technology]. 2018;6(378):96–100. (In Russ.) 9. Zaitsev D. V., Grechukhin A. P., Rudovsky P. N. Threading system when forming a 3D orthogonal woven fabric. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educational Institutions. Series Textile Industry Technology]. 2017;3(369):154–156. (In Russ.) 10. Grechukhin A. P., Rudovsky P. N., Khabibulloev A., Kulikov A. V., Starinets I. V. Development of new spatially reinforced materials based on multi-threaded 3D orthogonal weaving technology. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educa- tional Institutions. Series Textile Industry Technology]. 2023;2(404):243–247. (In Russ.) 11. Khabibulloev A., Grechukhin A. P., Rudovsky P. N., Starinets I. V., Kulikov A. V. Calculation of reed parameters during the formation of three-dimensional orthogonal fabrics with ligation by one system of threads in the formation zone. Izvestiya vysshih uchebnyh zavedenij. Seriya Tekhnologiya tekstil'noj promyshlennosti [Proceedings of Higher Educational Institutions. Series Textile Industry Technology]. 2022; 6(402):92–97. (In Russ.)
Author's info: Amirchamza Khabibulloev, Kostroma State University, Kostroma, Russia, keepsabr007@gmail.com, https://orcid.org/0000-0002-2991-6165
Co-author's info: Alexandr P. Grechukhin, Kostroma State University, Kostroma, Russia, niskstu@yandex.ru, https://orcid.org/0000-0002-7732-3583
Co-author's info: Pavel N. Rudovsky, Kostroma State University, Kostroma, Russia, pavel_rudovsky@mail.ru, https://orcid.org/0000-0002-8675-2910
Co-author's info: Ivan V. Starinets, Kostroma State University, Kostroma, Russia, iv.starinets@yandex.ru, https://orcid.org/0000-0003-4111-2458