  yakupov_es-tik-2021-1-ru.pdf |
- 10
- MEASURING SYSTEM BASED ON THE SBRIO-9636 CONTROLLER AND THE MEMS ADXL1005 BROADBAND ACCELEROMETER
- Yakupov E. S. Measuring system based on the sbRIO-9636 controller and the MEMS ADXL1005 broad-band accelerometer // T Tekhnologii i kachestvo = Technologies & Quality. 2021;1(51): 55–57. (In Russ.) https://doi.org/10.34216/2587-6147-2021-1-51-55-57.
- DOI: https://doi.org/10.34216/2587-6147-2021-1-51-55-57
- УДК: 004.03:621.396
- Publish date: 2021-03-11
- Annotation: This article describes a measurement system based on a programmable single-Board controller sbRIO-9636, which is designed to control vibration acceleration measurements. A low-noise broadband accelerometer MEMS ADXL1005 is used as a measuring sensor. This paper provides information about the limitations of the considered measuring system related to the technical characteristics of the controller and sensor. A listing of the programme developed in the LabVIEW environment is also provided. The frequency and amplitude ranges that the system can measure are indicated. The given values are justified. The measurement system was validated, and the results are summarised in a table. Based on the results of the work, conclusions are made, which state that the considered measuring system should be used in research works related to experimental modal analysis.
- Keywords: LabVIEW, sbRIO-9636, accelerometer ADXL1005, measurement system, modal analysis of forced oscillations, LabVIEW Real-time, FPGA
- Literature list: 1. Zhulev V., Kuts M. Contact models verification by the finite element model updating method based on the calculation of the sensitivity coefficient // Matec web of conferences : 14th International scientific-technical conference “Dynamic of technical systems”, DTS-2018. Rostov-on-Don : EDP Sciences, 2018. URL: https://www.matec-conferences.org/articles/matecconf/pdf/2018/85/matecconf_dts2018_02008.pdf (data obrashcheniya: 15.01.2021). 2. Biderman V. L. Teoriya mekhanicheskih kolebanij. M. : Lenand, 2017. 416 s.